Tub /Shower Combination

Tub and shower combinations are quite popular because they satisfy two needs using the same floor space.

In traditional construction, walls around the tub are tiled with ceramic tile to form a shower enclosure. These work well, but require maintenance and can develop leaks over time.

Manufactured tub and shower combinations may be one-piece acrylic over fiberglass units, or they may come in sections. Either does quite well, although the one-piece units tend to be heavier and more polished.

They are also bulkier, require slightly more floor space, and they won't fit through most doorways. Consequently, they are used primarily in new construction.

One-Piece Tub/Shower Enclosures

Nothing is more attractive, yet as simple and functional as a one-piece tub and shower enclosure. They have the advantage of never leaking if installed properly, but the color will fade over time.

Do not buy a one-piece tub and shower combination for a remodeling project unless you know it can be installed in your home. Before you shop for one of these units, be sure to measure the doorways it will have to pass through. If you have any questions, check with your builder or remodeler.

We offer units by three manufacturers, Kohler, Lasco, and Aker. Most full units with ceilings are made of acrylic. Open-top models are generally made of fiberglass/gelcoat. Many are ADA compliant. Below are a few samples:

Aker ACTS-60 Acrylic	Lasco 2543-CTGM Fiberglass	Kohler VeracruzTM Fiberglass
For a detailed comparison of materials see: Bathtub Materials

If your home cannot accommodate a one-piece unit, there are alternatives from which to choose.

Many companies sell sectional shower enclosures that are often hard to distinguish from one-piece units.

Sectional units are designed for remodeling jobs because they can fit through the smallest doorways, and they can be adjusted to accommodate uneven and out-of-plumb walls. But once installed, they give the appearance of being a one-piece unit and offer the advantages of being attractive, water-tight and easy to clean.

The Sonata, 3 piece shower unit (shown at the left), is just one of several multi-piece tub/shower units offered by Kohler. Available in 15 different colors, the Sonata's high-quality acrylic finish means long lasting durability and shine. The Series 6101 (pictured at the right) by Sterling, is made with Solid VIKRELLTM Material. The color is molded throughout which means no layers to chip, crack, or peel. This model has a textured swirl gloss finish, and slip resistant bottom.

Lasco offers a Remodel series of 2-piece and 3-piece sectional enclosures that are ideal for retrofitting outdated bathrooms. Their units are made of fiberglass-reinforced polyester with a gelcoat finish. Aker Plasticssells a number of multi-piece tubs/showers in a gelcoat finish as well. The Aker line boasts Balsa Wood "Anti-Flex" floor construction that produces a finish level of rigidity, strength and longevity.

Mustee offers an economical line of fiberglass or thermoplastic tub walls designed to accommodate a variety of existing tubs. Florestone also makes remodel units of gel coated fiberglass tub/showers and acrylic bathtubs.

Faucets
Many types and styles are available, but the typical plan calls for a wall-mount faucet over the drain. Consider a handheld sprayhead for cleaning and hair-washing purposes, and try to select your faucet before construction begins.

If only one shower spray can be installed, it should be an adjustable handheld one. You will have to choose your shower valve before construction begins to make sure the correct rough-in valve is installed. But even though they may be sold separately, make sure you buy the rough in valve and the finish sprayhead at the same time from the same source. Believe it or not, they're not all compatible, even if they're said to be universal.

Also think about where you want to place the valve controls. If you don't want to get soaked when you reach into the shower to turn it on, consider installing the valve in a more convenient location other than directly under the sprayhead.

If you have your heart set on a carwash shower with multiple heads and sprays, you may need a custom-built shower enclosure.

Few prefab enclosures will accommodate the elaborate valves and fittings customers are demanding these days. Check with your salesperson as well as your builder when making this selection. Showers are becoming the most challenging architectural item in the home today. Make sure you have an adequate water supply before buying a high-tech shower system.

Shower Curtains/Doors
Shower curtains can be used in these units, or shower doors can be installed..

See Also:

Other Links to Related Websites:

 BACK

Was this article helpful?   Yes    No